Lg g4 leather back-Blue
Wireless Charging & NFC Genuine Leather Battery Back Cover For LG G4 H815 H811 VS986 US991 F500 LS991 (Genuine Leather-Black)

NeWisdom Wireless Charging & NFC Genuine Leather Battery Back Cover For LG G4 H815 H811 VS986 US991 F500 LS991 (Genuine Leather-Blue)

Product Description

Color: G4 Leather Blue

100% Genuine OEM Original LG Mobile Parts Replacement original battery cover type Genuine leather coated on the outer surface. Available Colors : Black Leather, Brown Leather, Blue Leather.

Product Features

  • Made of Eco-friendly Genuine Leather.
  • Come with Qi Wireless Charging & NFC Antenna Receiver.Wireless charging support H815 H811 F500 VS986 LS991,NOT SUPPORT AT&T H810 H812 & lg g4 dual sim
  • 100% MONEY-BACK GUARANTEE within 30 Days if it is our product quality problem.
  • We suggest you use together with NeWisdom® wireless charging dock or official LG wireless charging base to enable more steady wireless charging function.
  • As it is new technology,any problem you meet ,please contact us,we can communicate and solve together 100%. Negative feedback can not solve problem for u. If you like to write negative review or feedback,please do not place order,thank you.

Technical Details

  • With wireless charging receiver
  • With NFC function
  • Genuine Leather
Hear what others have to say.
5.0 / 5
  • Carol and David Melvin 2016-05-16 10:06:28
    Great way to add wireless capability, tricky install
    Agonized over the installation (the instructions give centimeter measurements for installing in the phone's back cover. the contacts are TINY, so you cannot get it wrong. I succeeded, and it works well, but be careful installing!
  • Michael 2016-05-16 10:06:05
    Another option for your G4
    I purchased this in hopes of making the leap to wireless charging. My HTC M8 died because of the micro sub port going bad this week. Having to leave town I had to quickly purchase another phone so I chose the G4 for the removable battery. Then I saw this item and purchased it as a backup just in case the battery died as well and the port goes bad also. It took a little time to align the unit but after the measurements were validated with the included instructions it worked like a charm! Very happy with this.
  • Animexstudio 2016-05-16 10:05:26
    Works great very happy with it.
    Worked perfectly with my LG g4, and was a breeze to install on the back cover. A tiny little paper instruction sheet comes with that recommends you use a heat gun or blow dryer to take off the original NFC chip. Took me all of 2 minutes to get it on my phone, and the wireless is responsive, quick, and easy to use.
  • JAY 2016-05-16 10:05:08
    Works as expected
    This works great!!! I put it on my LG G4 and I am completely happy with it. It doesn't seem to work with a thick case so keep that in mind when purchasing. It is easily installed when following directions. Turn your LG into a wireless charging device.
  • R. Quesada 2016-05-16 10:04:33
    Easy to apply, works as described.
    Easy to apply, works as described with NFC and Qi chargers. What is difficult and time consuming is to remove the previous sticker, I had to use a rubber covered flat screwdriver very carefully to wipe out the residues of the older one.
  • Kyle R Hunt 2016-05-16 10:03:57
    Works great once installed
    worked better to put a small piece of double sided tape on the back of the pad, line the pad up with the phone itself, hold it in place with the tape then remove the back from the pad and put the back cover on the phone. 100% confidence it is attached properly and a lot less measuring.
  • JF 2016-05-16 10:03:31
    Best accessory ever!
    Follow the videos online and ensure that you get it positioned perfectly, or it will not work. The contacts have to touch the back of the phone properly to make the connection necessary to charge. Be patient and it will be the best accessory you have ever gotten for your phone.
  • Amazon Customer 2016-05-16 10:03:00
    Five Stars
    It worked! My LG G4 is now wireless charging !!! Instead of leaving my phone in my pocket, I have it wirelessly charging on my desk so I'm always at 100% when I leave work! Great customer service! Two thumbs up! I won't entertain an iphone until they support wireless charging!
  • Christian Lester 2016-05-16 10:02:19
    Will apply to every leatherback I come to find.
    Holy cow, that was easy. I watched a ton of youtube videos first, but all of them made it ten times harder than following the guides included. Maybe the upgraded version just made it that much easier. 1. Used the wife's hair dryer 2. Pulled off the protective sticker 3. Used the hair dryer again 4. Pulled off the nfc starting from the contact pins 5. Measured where the two contacts should roughly be (there's a small indent near the nfc pins) 6. Removed film from sticky side of new chip 7. Carefully placed it where the measurements were 8. Measure again, and nudge the device into exactly where they recommend 9. Push down 10. Test NFC and QI and fix if needed 11. Apply protective sticker with your choice of three colors 12. Enjoy freedom. Added a bit of weight of my phone surprisingly(me likey). The upgraded version has some serious cushioning on the pins and adhesive EVERYWHERE on the back. It felt like it was impossible for it not to work.
  • goatimus 2016-05-16 10:01:55
    Works great on AT&T LG G4 phones
    Perfect! Works great! I installed these on two of my AT&T LG G4 without a problem. Based on some other comments about dropping these onto the originally supplied back covers which are not designed for the extra set of contacts the wireless coils provide, I laid down three layers of standard black electrical tape onto the phone backplate just under the new Qi charger sticker contacts. Then I squished the charger coil sticker into place, then placed the cover sticker on top of the coil sticker. Buttoned up both phones and placed onto the charger plate and they both worked. Excellent!
  • aooga 2016-05-16 10:01:05
    Great product at a great price!
    Installation was very simple and only took about 2 minutes. Align it on the phone directly, remove the backing, then place the back cover on the phone. That way you know for sure all the contacts are aligned. It doesn't charge as fast as a USB connection, but I didn't expect that. It doesn't overheat, and it's perfect for overnight charging. No extra bulk was added to the phone.
  • spiderhole 2016-05-16 10:00:26
    Cheap and works well
    Works well and my phone charged quickly. Only complaint is that I need to charge without a case as my Incipio blocks the charge signal, but I think that's not the fault of this product and is just a function of the case. Anyway, it was a breeze to install and fits the phone perfectly.
  • J. Bray 2016-05-16 10:00:01
    Works Perfectly on my LG G4!
    Followed the directions closely but still needed several attempts to install successfully. Works perfectly using the Tylt Qi charger through the Otterbox Defender case while on the phone. Charges to 100% quickly. Highly recommend this patch using the stock back. Heating not an issue.
  • Samuel G. Getta 2016-05-16 09:59:37
    Charged my life.
    Fast shipping. Very tedious to line up. It took me several tries but once you get it, forget it. Works flawlessly. Charges good. Android Pay works. Win Win I should have done this a year ago, will never go back to wired charging again.
  • Decibel 2016-05-16 09:59:08
    NFC and Qi have a pretty big and easy to hit target area at the ...
    I have my LG G4 in a Terrapin [SLIM FIT] LG G4 Case (http://www.amazon.com/gp/product/B00UN6Y1Z6) and the PowerBot PB1020 Qi Enabled Wireless Charger (http://www.amazon.com/gp/product/B00F6SPYJS) powered by the Motorola Turbo Charger block that came with my Droid Turbo. Putting this on was really straightfoward and mildly forgiving if you get it crooked. What I did to not get it crooked was to take a Sharpee and outline the original NFC sticker's contact point to act as an anchor for getting the rest of the sticker placement correct. I tested the NFC and Qi charging with no problems at all. NFC and Qi have a pretty big and easy to hit target area at the center of the back. For reference, my Droid Turbo had it about 2/3 the way down the back, which is a little awkward at first. I haven't yet timed how long it takes to recharge on this, but it going to be a nightstand thing so I'm not in a hurry for that use.
  • LUIS J 2016-05-16 09:58:38
    Great product
    I originally gave this product a 1 star because I could not get it to work but after making adjustments it now works. It was user error that prevented it from working when I first installed it but I realigned it and now both wireless charging and NFC work perfectly. Great product and highly recommended. Make sure you align it correctly and everything should work.
  • merrel raney III 2016-05-16 09:58:02
    ... LG G4 case I applied this and it's working great with [[ASIN
    After carefully removing the old NFC tag on my LG G4 case I applied this and it's working great with Wireless Charger, Spigen® [Wireless Charging Pad] 3 Coil Charger [F300W] Premium Wireless / Qi Charging Stand Only for Qi Enabled Phones Galaxy S7 / Galaxy S7 Edge / Galaxy Note 5/Galaxy S6 Edge Plus/S6/S6 Edge - SGP11480, it even does rapid charging.
  • Harlan P. 2016-05-16 09:57:30
    ... and heat the back of your back cover for like 1-2 minutes on high and the NFC chip should ...
    You have to use a hair dryer and heat the back of your back cover for like 1-2 minutes on high and the NFC chip should come right off. Then proceed to place the chip over the battery lining the 2 contact points and then secure to cover lightly. Check to see if it works, if it does then proceed to close the back cover more firmly to seat in the chip. I was able to do this in one try. I did not use the chip cover sticker because the bulge the chip creates is sort of significant and does not need to be any thicker. The phone heats up sometimes especially charging from near zero juice.
  • C. 2016-05-16 09:57:03
    Just got mine today - easy to install
    Just got it today, it was very easy to install on my G4 while watching a YouTube video. I got it with the Yootech charging pad. It's sleek, nice, and looks like a guitar pick haha. It worked through my thick phone case too, and my case is just like an otter box. I'll see about posting a picture :-)
  • kylehase 2016-05-16 09:56:24
    Works as expected
    Works perfectly, just remember to install the included shield. I placed this over a Qi charger before installing the shield in order to test the alighment and it made my screen go crazy due to phantom touches. Everything worked fine once the included shield was installed.